Dynamo 540 MC General Office Micro-Cut Shredder

·           Auto Jam Resistant (Utilizing Feed Level Indicator Eye) - Capacity display (LEDs) show level of sheets being fed into shredder throat.  Green, Yellow and Red LEDs indicates each feed load’s conformance to shredder’s specs. 

·           Auto Jam Reverse – If paper starts to jam Reverse mode activates preventing the jam. 

·           Auto Stop - Activates when shred cutting action is completed.

·           Auto Stop - Shredder will not start if cabinet door ajar or open.

·           Auto Stop - Insert paper and when the batch is shredded cutters cycle for a few seconds and stops.

·           Auto Lubrication Signal - Manual LED flickers after 30 minutes of actual cutting time. 

·           Auto Cutter Cleaning Signal - Signals need to activate Auto Clean of cutter head to ensure specified feed capacity.

·           Auto Clean - Reverse action cleans shred debris from the head and rejuvenates the cutter.

·           Auto Wave Protection - Electronic wave interception devise.

·           Auto Power Saver (Energy Saving Mode) - After ten idle minutes shredder switches to standby.

·           Auto Diagnosis Recording System (Patented) - Records shredding time, number of auto reverse cycles, and quantity of pages shredded (a use and maintenance assist). 

·           Environmental Anti-Pollution Devise (Patented) - Waste rack holding devise locks bag to bottom of cutting mechanism increasing cabinet’s capacity for waste.  Prevents fine dust and chips from escaping into work area. 

·           Optical Start Sensitivity - Recovery Mode (Patented) - Recoups sensitivity when optics can’t detect fed paper.

·           Manual Start - Shreds small pieces of paper and undetectable films.  

·           Manual Safety Switch - Back up to on and off pad.  Located on right corner of right side panel.  

·           Manual Reverse - Cutter runs in reverse for three seconds, stops and returns to AUTO mode.   

·           Highly Durable Cutters (Patented) - Unique design to ensure prolonged sharp life.                                               

·           Metal Geared Motor Drives - Provides greatest power and strength contrasting other standard belt or chain designs.   

·           Continuous Duty Motors - Eliminates constant shut downs while waiting for motor to cool and reset.  

·           LED Indicators - Auto, Manual, Stop, Reverse, Door Open, Full, Start, Reverse, functions.

·           Safety Protection Design - Provided by height of cabinet and  six inch depth of blades below cutter throat entrance. 

·           Shred Size – 5/64 x 19/32” (Security Level 4).

·           Feed Throat – 16.2” wide

·           Sheet Feed Capacity – 25-28 pages depending on paper weight.

·           Waste capacity - 64 gallons.

·           Cabinet size-with casters - 24.8” x 24.8” x 42.9”

·           Power - Standard three prong commercial - 115 volt 15 amp plug for standard outlets.  

·           Assembly and performance compliance - All models assembled in USA and/or TAA compliant.